A
DECarray Cabling Information
This appendix consists of tables containing cabling information for the
DECarray variations.
A.1 Single-System Configurations for DECarray with SF7x
Enclosures
Table A–1 contains cabling information for DECarray variations containing
SF7x enclosures in the single-system configuration.
Note the following:
• DSSI bus termination is supplied by the TTM module inside the SF7x
storage enclosures in position 3 and 8.
• The SF7x storage enclosures in positions 3 and 8 must be operating in
split-bus mode.
• If a DSSI bus is not connected to a SF7x storage enclosure in position 3 or
8, then DSSI bus termination is accomplished by using a DSSI terminator
(PN 12–31281–01).
• Split-bus mode is supported only in the single-system configuration.
DECarray Cabling Information A–1
Comments to this Manuals