Digital SF200 Installation Guide Page 253

  • Download
  • Add to my manuals
  • Print
  • Page
    / 380
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 252
Installing the Magazine Tape ISE in a DECarray Cabinet
8.5 Final Verification
8.5 Final Verification
Once the hardware installation, cabling and labeling, and the powering up
steps are complete, you are ready to configure the DSSI subsystem and verify
the correct operation of each ISE in the array with the host system.
Refer to the KFMSA Module Installation and User Manual for detailed
information on the correct operation of each ISE. These manuals contain
procedures for establishing the communications between the ISEs, the adapter
module, and the system. They also contain step-by-step procedures for
reconfiguring the system with its newly installed DSSI devices.
Refer to the manuals for the disk ISE and magazine tape ISE for detailed
information on the local programs in the ISEs.
If at any time you detect a failure, refer to Chapter 9.
Once the verification is complete, close the cabinet doors; turn the hex-Allen
fasteners one quarter turn clockwise to lock. The system is ready to be turned
over to the system manager.
Installing the Magazine Tape ISE in a DECarray Cabinet 8–39
Page view 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 379 380

Comments to this Manuals

No comments