Installation Troubleshooting
9.3 Removing an RF Disk ISE from an SF7x Storage Enclosure
3. Unpack the replacement RF disk ISE:
a. Open the shipping carton.
b. Remove the disk ISE wrapped in the protective wrapper.
c. Open the protective wrapper and remove the disk ISE. Discard the
desiccant bags.
d. Place the disk ISE on the protective wrapper.
4. Remove the skid plate and wedges from the faulty disk ISE and install
them on the replacement disk ISE (Figure 9–6).
Figure 9–6 Disk Wedges and Skid Plate
WEDGE
SKID PLATE
SHR-X0158A-90
NOTE TO ILLUSTRATOR:
This illustration is
at .30% of original
RF7X
MA-0422-92.DG
Installation Troubleshooting 9–15
Comments to this Manuals