Digital SF200 Specifications download pdf (Page 11)

SF200 Manual

SF200E-0160-01 REV 04

Diane Smith

4/22/13

Page 11 of 28

4.2.5 Connect the SF-200 to the Mounting Pate using the

hardware that came with the Mounting Plate.

Be careful not to over tighten.

Qty = 4 Thread Forming Screws

Qty = 4 Washers

Note1 : The SF-200 Case is held together with four small screws.

DO NOT remove these small screws.

Note 2: The Thread Forming Screws that are used to mount the SF-200

to the Mounting Plate will screw into the same hole as the

small screws but will not go deep enough to touch the small

screws.

Note 3: The Thread Forming Screws will form their own threads into the

case as you screw them in.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Digital SF200 Specifications Page 11