Digital SF200 Installation Guide download pdf (Page 210)

6–42 Installing the Magazine Tape Subsystem in an SF200 Storage Array

6.4 Labeling the DSSI Cables and Magazine Tape

Subsystem

For a single-host conﬁguration, use the following colored labels on the

SF72 OCP door, magazine tape subsystem front panel, and all DSSI

cables.

Label Colors Connections

Blue Port 1, positions 5, 1, 3

Red Port 2, positions 6, 2, 3

Yellow Port 3, positions 4, 8

Green Port 4, positions 7, 8

For a dual-host conﬁguration, use the following colored labels on the SF72

OCP door, magazine tape subsystem front panel, and all DSSI cables.

Label Colors Connections

Blue Port 1, positions 5 and 1, port 9

Red Port 2, positions 6 and 2, port 10

Yellow Port 3, position 3, port 11

Green Port 4, position 4, port 12

Blue with white strip Port 5, position 7, port 13

Red with white strip Port 6, position 8, port 14

6.4.1 Filling Out the Labels

Follow the steps on the inside cover of the SF Family Label Booklet (part

number 36–32882–01) to ﬁll out the labels for the DSSI cables and SF72

operator control panels.

Proceed once you have ﬁlled the cable and OCP labels.

6.4.2 Labeling the Cables

For each cable you just installed, place a label 2 inches behind the

connector as shown in Figure 6–17.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 312 313

No comments

Digital SF200 Installation Guide Page 210